Hatteland-display HT B22 (Fanless) Manual de usuario descargar pdf (Pagina 13)

General Installation Recommendations

Installation

IND100210-14

Housing / Terminal Block Connector Overview

Housing / Terminal Block connectors are available in different sizes (example 2-pin, 4-pin, 5-pin) which plugs into the

connector area of the unit. They are mounted by factory default and delivered with the unit. The housing / terminal

block connectors have steering rails, which ensures that it can not be mounted wrong. The color of these connectors

may vary between black, green and orange depending on manufacturer. You may use approved equivalents of these

connectors, but note that warranty will be void if any damage would occur to either the unit’s original PCB terminal

socket connector or inside the unit (electronic components, boards etc.). The table below is applicable for any Series

X products, such as Display and Panel Computers, including newer type of Stand-Alone Computers.

Illustration Pins Manufacturer Details Connector used for module

5-pin Phoenix 1827732

MC 1,5/ 5-STF-3,81

Screwdriver: SZS 0,4X2,5mm

VDE, slot-headed.

Tightening torque min. 0.22 Nm.

Tightening torque max 0.25 Nm.

• RS-422 / RS-485 / SCOM (Serial Remote Control) / Buzzer

• RS-422 / RS-485 NMEA (PCA100293-1)

• Digital Input/Output (HT 00268 OPT-A1)

Identi ed on Hatteland Display product data sheet as:

“Terminal Block 3.81”

└ Reference: http://catalog.phoenixcontact.net/phoenix/treeViewClick.do?reloadFrame=true&UID=1827732

2-pin Phoenix 1961986

MSTB 2,5/ 2-STF-5,08 BK

Screwdriver: SZS 0,6x3,5, slot-

headed.

Tightening torque min. 0.5 Nm.

Tightening torque max 0.6 Nm.

• DC Power IN (24VDC) - Single Input

Identi ed on Hatteland Display product data sheet as:

“Terminal Block 5.08”

└ Reference: http://catalog.phoenixcontact.net/phoenix/treeViewClick.do?reloadFrame=true&UID=1961986

4-pin Weidmüller 1792970000

BCZ 3.81/04/180F SN BK BX

Screwdriver: 0.4x2.5mm DIN 5264.

Tightening torque min.. 0.2 Nm.

Tightening torque max. 0.25 Nm.

• CAN Interface (HT 00254 OPT-A1)

Identi ed on Hatteland Display product data sheet as:

“Terminal Block 3.81”

└ Reference: http://catalog.weidmueller.com/catalog/Start.do?localeId=en&ObjectID=1792970000

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 65 66

Comentarios a estos manuales

Sin comentarios

Hatteland-display HT B22 (Fanless) Manual de usuario Pagina 13

Comentarios a estos manuales

Relacionado con productos y manuales para Ordenadores Hatteland-display HT B22 (Fanless)